Visible-Light-Driven Room Temperature NO2 Gas Sensor Based on Localized Surface Plasmon Resonance: The Case of Gold Nanoparticle Decorated Zinc Oxide Nanorods (ZnO NRs)

In this work, nitrogen dioxide (NO2) gas sensors based on zinc oxide nanorods (ZnO NRs) decorated with gold nanoparticles (Au NPs) working under visible-light illumination with different wavelengths at room temperature are presented. The contribution of localized surface plasmon resonant (LSPR) by Au NPs attached to the ZnO NRs is demonstrated. According to our results, the presence of LSPR not only extends the functionality of ZnO NRs towards longer wavelengths (green light) but also increases the response at shorter wavelengths (blue light) by providing new inter-band gap energetic states. Finally, the sensing mechanism based on LSPR Au NPs is proposed

Visible Light‐Driven p-Type Semiconductor Gas Sensors Based on CaFe2O4 Nanoparticles

In this work, we present conductometric gas sensors based on p-type calcium iron oxide (CaFe2O4) nanoparticles. CaFe2O4 is a metal oxide (MOx) with a bandgap around 1.9 eV making it a suitable candidate for visible light-activated gas sensors. Our gas sensors were tested under a reducing gas (i.e., ethanol) by illuminating them with different light-emitting diode (LED) wavelengths (i.e., 465-640 nm). Regardless of their inferior response compared to the thermally activated counterparts, the developed sensors have shown their ability to detect ethanol down to 100 ppm in a reversible way and solely with the energy provided by an LED. The highest response was reached using a blue LED (465 nm) activation. Despite some responses found even in dark conditions, it was demonstrated that upon illumination the recovery after the ethanol exposure was improved, showing that the energy provided by the LEDs is sufficient to activate the desorption process between the ethanol and the CaFe2O4 surface

A parts per billion (ppb) sensor for NO2 with microwatt (μW) power requirements based on micro light plates

A film of gas sensitive ZnO nanoparticles has been coupled with a low-power micro light plate (μLP) to achieve a NO2-parts-per-billion conductometric gas sensor operating at room temperature. In this μLP configuration, an InGaN-based LED (emitting at 455 nm) is integrated at a few hundred nanometers distance from the sensor material, leading to sensor photoactivation with well controlled, uniform, and high irradiance conditions, and very low electrical power needs. The response curves to different NO2 concentrations as a function of the irradiance displayed a bell-like shape. Responses of 20% to 25 ppb of NO2 were already observed at irradiances of 5 mWatts·cm-2 (applying an electrical power as low as 30 μW). In the optimum illumination conditions (around 60 mWatts·cm-2, or 200 μW of electric power), responses of 94% to 25 ppb were achieved, corresponding to a lower detection limit of 1 ppb of NO2. Higher irradiance values worsened the sensor response in the parts-per-billion range of NO2 concentrations. The responses to other gases such as NH3, CO, and CH4 were much smaller, showing a certain selectivity toward NO2. The effects of humidity on the sensor response are also discussed

Integrated Strategy toward Self-Powering and Selectivity Tuning of Semiconductor Gas Sensors

Inorganic conductometric gas sensors struggle to overcome limitations in high power consumption and poor selectivi-ty. Herein, recent advances in developing self-powered gas sensors with tunable selectivity are introduced. Alternative general approaches for powering gas sensors were realized via proper integration of complementary functionalities (namely; powering and sensing) in a singular heterostructure. These solar light driven gas sensors operating at room temperature without applying any additional external powering sources are comparatively discussed. The TYPE-1 gas sensor based on integration of pure inorganic interfaces (e.g. CdS/n-ZnO/p-Si) is capable of delivering a self-sustained sensing response, while it shows a non-selective interaction towards oxidizing and reducing gases. The structural and the optical merits of TYPE-1 sensor are investigated giving more insights into the role of light activation on the modu-lation of the self-powered sensing response. In the TYPE-2 sensor, the selectivity of inorganic materials is tailored through surface functionalization with self-assembled organic monolayers (SAMs). Such hybrid interfaces (e.g. SAMs/ZnO/p-Si) have specific surface interactions with target gases compared to the non-specific oxidation-reduction interactions governing the sensing mechanism of simple inorganic sensors. The theoretical modeling using density functional theory (DFT) has been used to simulate the sensing behavior of inorganic/organic/gas interfaces, revealing that the alignment of organic/gas frontier molecular orbitals with respect to the inorganic Fermi level is the key factor for tuning selectivity. These platforms open new avenues for developing advanced energy-neutral gas sensing devices and concepts

Facile integration of ordered nanowires in functional devices

The integration of one-dimensional (1D) nanostructures of non-industry-standard semiconductors infunctional devices following bottom-up approaches is still an open challenge that hampers the exploita-tion of all their potential. Here, we present a simple approach to integrate metal oxide nanowires inelectronic devices based on controlled dielectrophoretic positioning together with proof of conceptdevices that corroborate their functionality. The method is flexible enough to manipulate nanowiresof different sizes and compositions exclusively using macroscopic solution-based techniques in conven-tional electrode designs. Our results show that fully functional devices, which display all the advantagesof single-nanowire gas sensors, photodetectors, and even field-effect transistors, are thus obtained rightafter a direct assembly step without subsequent metallization processing. This paves the way to lowcost, high throughput manufacturing of general-purpose electronic devices based on non-conventionaland high quality 1D nanostructures driving up many options for high performance and new low energyconsumption devices

NH3 sensing with self-assembled ZnO-nanowire μHP sensors in isothermal and temperature-pulsed mode

Dielectrophoretic alignment is found to be a simple and efficient method to deposit the solution prepared ZnO nanowires onto micro hot plate substrates. Due to the strong surface effects, positive temperature coefficient for resistance was encountered with ZnO nanowires in the high temperature range (>250 degrees C). The response to ammonia (NH3) was evaluated in isothermal and temperature-pulsed operation mode; the relative higher response observed in the latter case demonstrates that the use of this methodology is a good strategy to improve the performance of metal oxide sensors based on nanomaterials. Here, we evaluate the response to NH3 and qualitatively describe the sensing mechanism in temperature-pulsed mode, highlighting the main differences compared to the standard isothermal methodology

Charge Transfer Characteristics of n-type In0.1Ga0.9N Photoanode across Semiconductor-Liquid Interface

Understanding the mechanisms of charge transfer across the semiconductor/liquid interface is crucial to realize efficient photoelectrochemical devices. Here, the interfacial charge transfer characteristics of n-type In0.1Ga0.9N photoanodes are investigated and correlated to their photo-activity properties measured in phosphate buffered saline solution (pH 7) under illumination conditions. Cyclic voltammetry measurements show evident photoactivity changes as the number of cycles increases. In particular, the photocurrent density reaches its maximum value after 49 voltammetric cycles; meanwhile, the photocurrent onset potential shifts toward more negative cathodic potentials. Electrochemical impedance measurements reveal that, first, the hole transfer process occurs mainly via localized states at the surface and the photocurrent onset potential is dependent on the energetic position of those states. Therefore, the observed initial photocurrent increase and cathodic shift of the photocurrent onset potential can be attributed to a decrease of the transfer resistance and partial passivation of the states at the surface. On the other hand, a gradual oxidation and corrosion of the InGaN surface arises, causing a consequential decrease of the photocurrent. At this point, the charge transfer process occurs predominantly from the valence band. This work provides a basic understanding of the charge transfer mechanisms across the InGaN/liquid interface which can be used to improve the overall photoanode efficiency

Enhancement of the photoelectrochemical properties of Cl-doped ZnO nanowires by tuning their coaxial doping profile

Arrays of vertically aligned ZnO:Cl/ZnO core-shell nanowires were used to demonstrate that the control of the coaxial doping profile in homojunction nanostructures can improve their surface charge carrier transfer while conserving potentially excellent transport properties. It is experimentally shown that the presence of a ZnO shell enhances the photoelectrochemical properties of ZnO:Cl nanowires up to a factor 5. Likewise, the ZnO shell promotes the visible photoluminescence band in highly conducting ZnO:Cl nanowires. These lines of evidence are associated with the increase of the nanowires" surface depletion laye

Water, copper, wak'as and empire in the high-altitude Atacama

Trabajo presentado en la 84th Annual Meeting of the Society for American Archaeology, celebrada en Albuquerque, Nuevo México (Estados Unidos), del 10 al 14 de abril de 2019Through his teaching and research, John Rick has reshaped our thinking on how people in the past related to the land, each other, and supernatural beings and the ways in which politics altered these relationships. Student participants on his field projects at the Panaulauca rockshelter site in the Junín puna, Zuni, and Chavín learned these lessons first hand, and many have continued to apply them in their own research. After briefly revisiting the Panaulauca field school, we discuss Inka incorporation of the Rios Loa and Salado region located in the high-altitude Atacama in northern Chile, which was accompanied by investment in state infrastructure, a marked increase in copper mineral mining, and the expansion of irrigation agriculture. We argue that an explanation for these changes requires acknowledging, as the Inka and local communities did, the role played by powerful non-human beings (wak¿as) in local life and imperial politics, and how Inka claims to water, land, and labor were reinforced and legitimated through their control and use of copper minerals, a substance essential for offerings to mountain wak¿as, the source of water and hence of life in this hyperarid environment

A parts per billion (ppb) sensor for NO2 with microwatt (μW) power requirements based on micro light plates

A film of gas sensitive ZnO nanoparticles has been coupled with a low-power micro light plate (μLP) to achieve a NO2-parts-per-billion conductometric gas sensor operating at room temperature. In this μLP configuration, an InGaN-based LED (emitting at 455 nm) is integrated at a few hundred nanometers distance from the sensor material, leading to sensor photoactivation with well controlled, uniform, and high irradiance conditions, and very low electrical power needs. The response curves to different NO2 concentrations as a function of the irradiance displayed a bell-like shape. Responses of 20% to 25 ppb of NO2 were already observed at irradiances of 5 mWatts·cm-2 (applying an electrical power as low as 30 μW). In the optimum illumination conditions (around 60 mWatts·cm-2, or 200 μW of electric power), responses of 94% to 25 ppb were achieved, corresponding to a lower detection limit of 1 ppb of NO2. Higher irradiance values worsened the sensor response in the parts-per-billion range of NO2 concentrations. The responses to other gases such as NH3, CO, and CH4 were much smaller, showing a certain selectivity toward NO2. The effects of humidity on the sensor response are also discussed